Senior Machinist Team Leader

Job Details Description Essential Duties and Responsibilities 1 Report to Machine Shop Supervisor on all machining and production matters and act as deputy to Machine Shop Supervisor as and when necessary. 2 In-charge of the production machines, to deal with any machining problems and report back to Machine Shop Supervisor. 3 Monitor the cleanliness of operators’ work areas and machines, ensure housekeeping is maintained and the standard continues to improve, on a weekly basis. 4 Strong advocate of safety at work for self and team members, ensures compliance and support to workplace health & safety initiatives including daily Take-5 and toolbox talks. 5 Participate in on-the-job training and assist to train other operators as and when required. 6 Complete connector inspection job sheets, when required. 7 Set up first article in machines and run through to completion with minimal supervision. 8 Complete production route sheets by ensuring operation are stamped when the work is completed. 9 Machine components to the requirements of route sheets and drawing instructions. 10 Perform daily routine maintenance checks and report any problems to Machine Shop Supervisor. 11 Check and top up machine coolant daily to the required level. 12 Monitor tool insert life and look for ways to improve. 13 Adjust tool offsets, as required, to comply with component drawings. 14 Accept and perform any additional work-related instructions/activities, to the best of his ability, as determined by the department Supervisor/Manager. 15 Perform the role of Site Incident Controller to take charge of the actual ground response operations and provide assistance / information to Singapore Civil Defense Force (“SCDF”) ground commander in the event of emergencies. 16 Comply with OSI Quality Management System, OSI HE&E policy and requirements. 17 Look to raise a minimum of 10 stop cards per year. Qualification Requirements Formal Education & Certification Minimum Diploma in Mechanical Engineering or Professional Technical Certificate. Knowledge & Experience Minimum 3 years of CNC Machining experience with Fanuc Control. Must be able to read an engineering drawing blueprint. Must be conversant in geometric tolerances. Must be fully conversant with basic inspection measuring equipment, including O/D micrometers, bore micrometers, depth micrometer, vernier calipers, ball gauges, and thread gauges. Understand basic trigonometry (sine, cosine, tan) Personal Attributes Able to read and speak basic English. Ability to pay attention to details and be a good team player.